Serving the Cape Coral area  ·  (239) 360-6374  ·  Open Mon-Sat 7am-6pm
📞 (239) 360-6374 Free Quote

Spray Foam Insulation in Sanibel, FL (33957) · Local Professionals

Cape Coral Spray Foam Insulation · Fast response in Sanibel and the Cape Coral area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+32Verified Reviews
11Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Sanibel's barrier island homes sit on slabs with vented attics that work overtime in the salt air and summer heat, and your ductwork and air handler are right there in that hot, humid space taking the full brunt of it.

When your cooling bills climb or a room over the garage never reaches temperature, when you spot condensation in the attic or damp insulation creeping into the rim joists, that is when homeowners in Sanibel (33957) call Cape Coral Spray Foam Insulation. We have been sealing and insulating homes across the Cape Coral area and out to Sanibel since 2015, and we know exactly what happens when humid salt air meets a vented attic and a slab foundation.

Spray Foam Insulation in Sanibel (33957)

Sanibel's homes are mostly single-story concrete block on slab, many dating back decades, with ductwork and air handlers installed in vented attics that bake in the sun and draw humid outside air in through every gap and bypass. In this climate (IECC zone 2A, hot and humid year-round), vapor drives from the damp salt air outside toward the air-conditioned inside, and that moisture finds its way into wall cavities, rim joists, and attic spaces where it condenses on cool surfaces and ruins insulation. Garages and lanai-side rooms are the weak points where humid air leaks through the ceiling and into the walls. Your cooling bill tells the story: if it is high and getting higher, or if one room or zone never reaches temperature, the problem is usually air leakage and poor insulation in the attic or walls, or both.

We serve Sanibel and the surrounding Cape Coral area with spray foam insulation and air sealing that stops that humidity at the boundary. Attic spray foam (open or closed cell), wall and injection foam retrofit, rim and band joist sealing, crawl space foam, and insulation removal and replacement are the jobs we do every week. We show up with a written estimate that names the R-value and thickness we will install, we do the work right (controlled thickness per pass, proper ventilation during cure, and a clear re-entry window), and we leave your property clean.

Our services in Sanibel

How a Job Works in Sanibel

We start with a free on-site assessment. We walk your attic, crawl space, or wall cavities, we look at what is already there (or what has to come out first), we measure the area, and we talk through whether open cell or closed cell foam is the right choice for your use and your budget. We give you a written estimate with R-value and thickness specified, so you know exactly what you are paying for.

On the work day, our fully insured crew sets up mechanical ventilation to manage fumes during cure. We spray the foam in controlled passes to hit the thickness and R-value in your estimate. If there is wet insulation or a moisture problem, we address it before any foam goes in, or we walk away. If existing insulation has to come out first (contaminated, settled, or in the way), we remove it and haul it off. Once the foam is cured (typically twenty-four to forty-eight hours), the space is ready for re-entry, and you can return to normal use.

We clean up after ourselves. Your property is left the way we found it, minus the air leaks and the humidity problem.

Attic spray foam in Sanibel typically runs from $1.50 per square foot for open cell to $1.20 per board foot for closed cell, depending on the area, the R-value you need, and what has to be removed first. A crawl space foam job often starts at $2,500 and goes up with square footage and moisture conditions. Wall injection foam (a common retrofit for older block homes with empty cavities) runs from $2 per square foot. Insulation removal, if your existing insulation is wet or contaminated, starts at $950 and depends on volume and disposal. Rim and band joist sealing, a critical air-sealing detail in a slab home, starts at $650. The biggest cost factors are the area you are treating, the R-value and thickness specified, whether you choose open or closed cell foam, and whether we have to remove and haul away old insulation first. Call us at (239) 360-6374 for a free estimate on your Sanibel home. We will walk you through the options and give you a firm price in writing.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Sanibel and nearby areas.

Why does my cooling bill spike in summer even though my air conditioner runs all day?
In Sanibel's heat and humidity, your vented attic is pulling humid outside air through every gap and bypass in the ductwork and ceiling. That moisture-laden air cools down in the air-conditioned space below, condenses on surfaces, and makes your system work harder to remove the moisture and maintain temperature. Spray foam in the attic, combined with air sealing around the ductwork and rim joists, stops that humid air at the boundary. You will feel the difference in a few weeks, and your bill will show it in the next billing cycle.
I see condensation and damp insulation in my attic during the summer. What has to happen before we spray foam?
Stop. Do not spray foam over wet insulation. We inspect the attic to find where the moisture is coming from (usually humid air leaking through ceiling penetrations, ductwork bypasses, or rim joist gaps). We may need to remove the damp insulation, dry the space with ventilation, and fix the leaks before the foam goes in. If there is active moisture or a roof leak, we address that first or we do not proceed. This is the honest approach, and it is the only one that works. Call us at (239) 360-6374 to schedule an inspection.
What is the typical cost to spray foam an attic in Sanibel?
Attic foam starts at $1.50 per square foot for open cell (lower cost, softer, good sound dampening) or $1.20 per board foot for closed cell (higher cost, denser, better moisture resistance). A typical 1,200 square foot attic runs $1,800 to $2,500 depending on the R-value, the type of foam, and whether old insulation has to come out first. Removal adds $950 and up. We give you a written estimate with R-value and thickness before we start.
Who decides the R-value and the thermal barrier rules for my Sanibel home, and how do I know what applies?
The City of Sanibel building code and the building official set the R-value and insulation requirements for your address. Ignition barriers and thermal barriers (the fifteen-minute rule) are code-driven, not our choice. Permits and contractor registration vary by city across the Cape Coral area, and there is no reciprocity between jurisdictions. Check the City of Sanibel website at https://www.mysanibel.com or call the building department to confirm what applies to your property. We will help you navigate the requirements once you know what your address requires.
Can we live in the house while the foam is being sprayed and curing?
On the spray day, we run mechanical ventilation to manage fumes, and we ask you to leave the area being sprayed (usually the attic or a closed room). The foam cures over twenty-four to forty-eight hours, and we recommend staying out of the space until cure is complete. After that, the space is safe for normal use. If you have an HOA in a master-planned community near Sanibel, check your architectural rules before we start, as some associations govern exterior work on metal buildings or additions. We coordinate the work around your schedule and your neighbors.
Are you insured for spray foam work on my Sanibel property?
Yes. We are fully insured with general liability and workers' compensation. Before any contractor starts work on your home, always ask to verify current insurance coverage. We carry the coverage you need, and we are happy to show proof.
When is the best time to schedule spray foam insulation in Sanibel?
Summer is the peak season because that is when homeowners feel the cooling bill and notice the humidity problem. If your attic is damp or your bill is climbing, do not wait. The sooner you seal and insulate, the sooner you stop the money leaking out. Fall and winter are lighter seasons, and you may get faster scheduling. Call (239) 360-6374 to discuss your timeline.
Why choose us?

Trusted professionals since 2015

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Cape Coral

All your work handled by qualified professionals in Cape Coral

Attic Spray Foam Insulation

Cooling-dominated attic sealing for Cape Coral's canal-side block homes

Included in your service

  • Seal vented attics over Cape Coral's concrete block ranch homes
  • Target ductwork and air handlers baking in Southwest Florida's heat
  • Stop humid canal air from driving the stack effect indoors
  • Address 1950s-onward attics across Lee County's block housing stock
Learn more→

Closed Cell Spray Foam Insulation

Rigid, moisture-resistant foam for Cape Coral's block walls and rim joists

Included in your service

  • Closed cell foam in rim joists of canal-front slab homes
  • Vapor retarder layer against Cape Coral's near-constant humidity
  • Added rigidity for garages and lanai rooms after Hurricane Ian repairs
  • Fits 2A climate zone walls from Burnt Store to Pelican
Learn more→

Open Cell Spray Foam Insulation

Expanding foam that seals gaps in Cape Coral's older block construction

Included in your service

  • Fill stud cavities in late-1950s Cape Coral block interior walls
  • Seal attic framing against hot, cooling-dominated 2A summers
  • Quiet rooms near busy canal-side streets and lanai additions
  • Slow moist air movement through Southwest Florida humidity
Learn more→

Wall & Injection Foam Insulation

Injection foam for Cape Coral's solid block walls, no demolition needed

Included in your service

  • Inject foam into block cores of canal-side Cape Coral homes
  • Target exterior walls facing year-round Gulf humidity
  • Slow vapor drive through 2A climate zone wall assemblies
  • Work around existing stucco on Cape Harbour and Yacht Club homes
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for Cape Coral's rare raised foundations

Included in your service

  • Seal perimeter walls of the few Cape Coral crawl space additions
  • Address humidity intrusion typical of 2A climate zone moisture
  • Protect floor framing in outbuildings near the canals
  • Serve raised sections across Lee and Charlotte county properties
Learn more→

Rim Joist & Band Joist Spray Foam

Sealing the rim joist gap in Cape Coral's slab-built homes

Included in your service

  • Foam the slab edge gap in Cape Coral block construction
  • Cut drafts tied to year-round Southwest Florida humidity
  • Protect framing near canal-side slab foundations
  • Address a common gap in 1950s-onward Cape Coral builds
Learn more→

Garage Spray Foam Insulation

Garage foam for Cape Coral's shared-wall heat and humidity

Included in your service

  • Foam garage ceilings under hot Cape Coral attic spaces
  • Seal shared walls common in canal-front block homes
  • Cut heat transfer during long Southwest Florida summers
  • Address moisture at garage doors facing storm season rain
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam built for Cape Coral's heat and salt air

Included in your service

  • Foam metal skin against Gulf-side salt humidity
  • Cut condensation in barndominiums near Burnt Store
  • Stabilize interiors through long cooling-dominated summers
  • Fit new builds going up on Cape Coral's north end
Learn more→

Commercial & New Construction Spray Foam

New construction foam for Cape Coral's growing north end

Included in your service

  • Foam roof decks from inside new Cape Coral builds
  • Insulate walls on slab foundations across Lee County
  • Prep ductwork and attics for cooling-dominated summers
  • Support rebuilds and new projects after Hurricane Ian
Learn more→

Insulation Removal

Clearing out old insulation before Cape Coral's next cooling season

Included in your service

  • Remove damp, aged batt from vented Cape Coral attics
  • Clear debris left after Hurricane Ian repairs across Lee County
  • Inspect ductwork and air handlers baking in attic heat
  • Prep block homes for new foam suited to 2A humidity
Learn more→

Insulation Replacement & Re-Insulation

Re-insulating Cape Coral homes for the next humid summer

Included in your service

  • Install open or closed cell foam in vented attics here
  • Re-insulate block walls across Cape Coral's older neighborhoods
  • Upgrade homes rebuilt after Hurricane Ian storm damage
  • Fit foam to this area's cooling-dominated climate zone
Learn more→

Air Sealing

Air sealing for Cape Coral's stack effect and canal humidity

Included in your service

  • Seal top plates in Cape Coral's concrete block attics
  • Close gaps in garages and lanai additions common here
  • Lower ACH50 readings for canal-side block homes
  • Reduce humid air intrusion through ceiling penetrations
Learn more→
Verified client reviews

32+ Verified Client Reviews in Cape Coral

⭐⭐⭐⭐⭐ 4.9/5 · 32 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Cape Coral · Response within 24h · No commitment · ☎ (239) 360-6374

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Cape Coral ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm